SuperStor Pro Indirect Fired Water Heater

The SuperStor Pro indirect water heater is a culmination of over 25 years of indirect system manufacturing experience. Built using high quality 316L stainless steel materials, the tank and heat exchanger eliminate the need for anode rods, resist corrosion, and allow for the system to be virtually maintenance free.

 We carry the full line of new replacement parts for HTP

Categories: , Tags: , Brand: .

Product Description

The SuperStor Pro indirect water heater is a culmination of over 25 years of indirect system manufacturing experience. Built using high quality 316L stainless steel materials, the tank and heat exchanger eliminate the need for anode rods, resist corrosion, and allow for the system to be virtually maintenance free. The corrugated heat exchanger draws energy from a boiler to heat the domestic hot water with an extremely low pressure drop. The built in auxiliary port for recirculation increases overall efficiency by eliminating short cycling of the connected boiler. The SuperStor Pro indirect water heater generates over 50% more hot water than many water heaters of similar size and offers extreme savings.

Specifications

Versatile Range

HTP sells more indirect water heaters than anyone in the country. When used in conjunction with an HTP high efficiency boiler the SuperStor Pro generates over 50% more hot water than the competition

Model Heat Exchanger Surface Test Pressure Working Pressure 180º F Boiler Water 1st Hour Rating* 180º F Boiler Btuh / Size Recommended Flow Rate Pressure Drop at Recommended Flow Rate
SSP-30 15 Sq. Ft. 300 PSI 150 PSI 228 Gal. 95,700 8 GPM 1.7Ft.
SSP-40 15 Sq. Ft. 300 PSI 150 PSI 257 Gal. 122,265 10 GPM 2.3Ft.
SSP-50 15 Sq. Ft. 300 PSI 150 PSI 287 Gal. 148,830 10 GPM 2.3Ft.
SSP-60 15 Sq. Ft. 300 PSI 150 PSI 303 Gal. 155,230 10 GPM 2.3Ft.
SSP-80 18 Sq. Ft. 300 PSI 150 PSI 347 Gal. 192,000 12 GPM 3.0Ft.
SSP-100 18 Sq. Ft. 300 PSI 150 PSI 387 Gal. 194,000 14 GPM 3.75Ft.

*doe test method based on 90º f temperature rise, 50º f / 140º f w/boiler water at 180º f note: tank recovery from cold start will be between 10-13 minutes when sized with correct flow rate, boiler size and pressure drop ratings from list in above chart. continuous flow rating calculation: first hour rating – (.75 * gallon capacity) = continuous flow rating

More Specifications

Stainless Steel Tank

Long lasting, quality 316L stainless steel tank construction, resists corrosion and eliminates the need for anode rods
SuperStor Pro Indirect Stainless Steel Tank

High Output Corrugated Heat Exchanger

SuperStor Pro Indirect Heat Exchanger Image
This extremely durable corrugated 316L stainless steel heat exchanger provides maximum efficiency. It resists corrosion and offers extremely low pressure drop

Quality Design

Why Choose A Stainless Steel Tank?
Because They Are Built to Last?

Minimal heat loss:
2” thick, water blown foam insulation significantly reduces heat loss

Increased efficiency:
the built in auxiliary port for recirculation increases overall efficiency by eliminating short cycling of the connected boiler

Low pressure drop:
the large diameter 316L stainless steel heat exchanger provides one of the lowest pressure drops in the industry

Aesthetically pleasing:
attractive faux stainless steel jacket

SuperStor Pro Indirect Stainless Steel vs. Glass-Lined
NO Anode Rods Needed
All coated tanks require anodes to delay inevitable corrosion and tank failure. The average commercial water heater last about 6 years. The SuperStor Pro stainless steel tank will outlast any coated steel tank in the market

Warranty

10 Year Warranty Ribbon Graphic
Covered by the industry’s strongest protection plan

10 year limited residential warranty
5 year limited commercial warranty

Purchase an extended warranty on SuperStor Pro models and receive a limited LIFETIME warranty.

Warranty

Savings

An indirect water heater is one the most cost effective ways to heat water because it eliminates the tremendous flue losses associated with gas-fired storage water heaters but without the hassles and extra costs of tankless gas water heaters. When used with a modern, high-efficiency boiler, these energy savings hold true even in the summer when your boiler isn’t needed for heat

  • Most efficient way to heat water when used with a 95% HTP high efficiency boiler
  • Indirect water heaters install without the need to have additional exhaust piping
  • HTP’s indirect SuperStor Pro offers a 10 year warranty
  • Indirect water heaters are 96% thermal efficient and lose only ½ degree per hour in heat loss
SuperStor Pro Indirect Water Heater Image

Videos

SuperStor Brochure CoverBrochure (.pdf)
Installation Manual (.pdf)
Installation Drawings (.pdf)
Parts Drawings (.pdf)
Submittal (.pdf)
Warranty (.pdf)

.IGS files SSP-50 (you will need a viewer such as autodesk to view files)

SuperStor Pro Solar Water Heaters with Electric (SE Series) Back Up 
Specificiations (.docx)
Submittal (.pdf)