SuperStor Ultra Indirect Water Heater
The SuperStor Ultra indirect water heater is a culmination of over 25 years of indirect system manufacturing experience. The 316L stainless steel tank resists corrosion and eliminates the need for anode rods, allowing for the system to be virtually maintenance free.
We carry the full line of new replacement parts for HTP
Description
The SuperStor Ultra indirect water heater is a culmination of over 25 years of indirect system manufacturing experience. The 316L stainless steel tank resists corrosion and eliminates the need for anode rods, allowing for the system to be virtually maintenance free. The heater draws energy from a boiler and thus does not need its own heat source. Hot boiler water flows through an internal heat exchanger in the tank, heating the domestic water. The SuperStor Ultra boasts three to five times more recovery than conventional gas-fired or electric water heaters.
Versatile Range
The SuperStor Ultra Indirect Water Heater from HTP is the culmination of 25 years of indirect system manufacturing experience
Residential Indirect
| Ultra Indirect Model | 180°F Boiler Water 1st Hr Rating 140°F | 115° F | Height Diameter | Pressure Drop (Ft) | Shipping Weight |
|---|---|---|---|---|
| SSU-20 | 121 GPH | 168 GPH | 27″/19.25″ | 6.0 | 60 LBS |
| SSU-30 | 154 GPH | 212 GPH | 39.5″/19.25″ | 6.0 | 72 LBS |
| SSU-30LB | 169 GPH | 234 GPH | 28.5″/23.25″ | 6.0 | 79 LBS |
| SSU-45 | 212 GPH | 292 GPH | 52.5″/19.25″ | 7.0 | 88 LBS |
| SSU-60 | 266 GPH | 370 GPH | 52.5″/23.25″ | 7.0 | 110 LBS |
| SSU-80 | 330 GPH | 440 GPH | 72″/23.25″ | 9.1 | 141 LBS |
| SSU-119 | 423 GPH | 564 GPH | 73.25″/27″ | 11.3 | 210 LBS |
Double Wall Residential Indirect
| Double Wall Indirect Model | 180° F Boiler Water 1st Hour Rating 140° F | 115° F | Height Diameter | Pressure Drop (Ft) | Circulator GPM |
|---|---|---|---|---|
| SSU-45DW | 70 GPH | 108 GPH | 42″/19.25″ | 8.2 | 6 |
| SSU-60DW | 90 GPH | 144 GPH | 52.5″/23.25″ | 12.8 | 7 |
| SSU-80DW | 138 GPH | 215 GPH | 72″/23.25″ | 13.6 | 10 |
| SSU-119DW | 210 GPH | 326 GPH | 74″/27″ | 15.9 | 12 |
Stainless Steel Tank
Long lasting, quality 316L stainless steel tank construction, resists corrosion and eliminates the need for anode rods
High Output Finned Cupronickel Heat Exchanger
Laser welding allows for more precise welding through a concentrated heat source, producing high quality 316L stainless steel tank construction
Quality Design
Low standby losses: reducing standby loss means increasing efficiency - 2 inch think environmentally safe foam insulation
Virtually maintenance free operation: the simple design of the heat exchanger eliminates the need for costly scheduled maintenance services
Installation flexibility: can be linked to a boiler using either a zone valve or a circulated pump
Aesthetically pleasing: the attractive and durable silver plastic jacket ensures a rustproof finish, even in moist environments
Limited Lifetime Warranty
Covered by the industry's strongest protection plan 7 year limited warranty for the commercial indirect
Warranty
Savings
An indirect water heater is one the most cost effective ways to heat water because it eliminates the tremendous flue losses associated with gas-fired storage water heaters but without the hassles and extra costs of tankless gas water heaters. When used with a modern, high-efficiency boiler, these energy savings hold true even in the summer when your boiler isn't needed for heat
- Most efficient way to heat water when used with a 95% HTP high efficiency boiler
- Indirect water heaters install without the need to have additional exhaust piping
- HTP's indirect SuperStor Ultra offers a lifetime warranty
- Indirect water heaters are 96% thermal efficient and lose only degree per hour in heat loss
| Hide Prices | Yes |
|---|---|
| Featured | No |
| Show Add To Cart | No |
Contact Us to Request a Quote
Connect with a real person who will go out of their way to help!
Fill out the form below or call us at: 877-377-0011